產品名稱：DF-TV7-T多光譜火焰探測器

DF-TV7-T多光譜火焰探測器
DF-TV7-T多光譜火焰探測器是使用三波段的多光譜紅外火焰探測器。DF-TV7-3IR響應烴類火災，是惡劣環(huán)境或者煙霧火災探測環(huán)境的正確選擇
1，IR3波段探測原理
2，烴類火焰類型
3，探測范圍：65-80米
4，響應時間從3秒到20秒可調節(jié)
5，質量保證3年
 

• Excellent false alarm immunity
• Wide field of view
• Through lens optical check
• 4-20 mA and relay ouptuts as standard
• 4-20 mA Hart option
• SIL 3
   
• 總覽:

• The Simtronics DF-TV7–T is a multi-spectrum infrared flame detector using three wavelengths. DF-TV7-3IR responds to hydrocarbon fires and is the right choice for operation in dirty environments or for detection of smoky fires.

  The MultiFlame DF-TV7–T is designed to respond to unwanted hydrocarbon fires, whilst maintaining a high degree of false alarm immunity. The device offers a wide range of output options, as standard and is suitable for use in SIL 3 applications. The unit may be interfaced directly with a wide range of fire panels, controllers and PLC’s etc.

  The unit is fully configurable using a wireless hand-held terminal (TLU) or optionally via HART (R) giving true flexibility to the installer. Time delays, sensitivity and output configuration are all set up via the TLU; a hazardous area approved hand-held unit.

  Wireless testing of the optical and output circuits are also possible using the TLU.
  
  
  技術參數(shù):
  
  

  GENERAL
  Type	Flame detector
  Product	Simtronics MultiFlame 3xIR
  Product code	Standard range: DF-TV7-XTA0-*;  Long range: DF-TV7-XTB0-*
  Manufacturer	Simtronics
  FLAME DETECTOR
  Type / Principle	Optical flame detection
  Technology	Multispectrum Infrared flame detector
  Fire Types	Hydrocarbon fires
  Modularity	Replaceable sensor cartridge
  PERFORMANCE
  Cone of vision	104° horizontal, 82° vertical at 50% of the axis dist., up to 120° Horiz. for shorter coverage
  Response time	3.0 sec with no temporization. Factory setting: delay 5 sec gives 6.0 sec resp. time.Adjustable delay 0 - 20 sec
  Detection range:
  - n-heptane (1 sq ft fire)	Standard: 40m (130ft). Long range: 80m (260ft)
  - Gasoline (1 sq ft fire)	Standard: 33 m (110 ft). Long range: 65 m (210 ft)
  ELECTRICAL
  Power supply	24V DC, range (18 - 28V DC)
  Power consumption	70 mA normal; 155 mA during self test
  Cable entry	2x M20, one entry with Exd plug – 2 additional as an option
  Junction box	“No-touch” field cabling”, detector replaceable without opening cable glands
  Connection	0.3 mm2 (22 AWG) - 1.5 mm2 (16 AWG), 3 or 4 wires
  Analogue output signal	0-20mA, source, max. load impedance 700?.
  Fault signalling	Diagnosis signalling in the 2.0 - 3.4mA range
  Relays	2 configurable relays for fire and fault
  Maintenance interface	Wireless (IR) handheld terminal for configuration, test and diagnosis
  ENVIRONMENT
  Storage	-40°C to +70°C (-40°F to 158°F)
  Operation	-20°C to +60°C (-4°F to 140°F)
  Humidity	95% RH (non-condensing)
  Ingress	IP66
  RFI/EMI	Complies with EN 50130-4
  HOUSING
  EX Classification	Ex d II C T6 Gb
  Material	Epoxy coated aluminium  or Stainless steel (Specify variant)
  Weight	Aluminium: 3.3 Kg (7.3 lbs), Stainless steel: 7.4 kg (16.3 lbs)
  Dimensions	233L  x 118D x 184H (mm),  8.78L x 4.65D x 7.25H (inches)
  APPROVALS
  ATEX	Certificate DM LCIE 03 ATEX 6263
  IECEx	Certificate DM IECEx LCI09.0018
  SIL	Certificate Suitable for use in SIL3 systems
  MarED	Certificate 23160/A0 EC + SMS.MED.D/81256/A.0
  ACCESSORIES
  TLU600	Infrared remote control unit
  LT15	Test lamp (EX flame simulation torch)
  AS008-450	Sunshade
  AS030-A/X	Multi-position angle wall mounting
  AS035-A/X	Pivot ball mounting bracket
  AS040	Sun visor (long, open)
  AS041	Sun visor (long, narrow)

  
  
  文檔:
  
   

  Product Sheet 380.04 KB

  Operating Manual1.55 MB

  Operating Manual LT15 (Flame Detector Test Lamp)346.03 KB
  
  證書:
  
  

  IECEx Certification170.21 KB

  HART Certification47.4 KB

  SIL 3 Certificate103.46 KB
  
  應用:
  

• Refineries
• Drilling and Production Platforms
• Fuel Loading Facilites
• Compressor Stations
• LNG/LPG Processing and Storage
• Gas Turbines
• Chemical Plants
• Aircraft Hangers
   

•